BRECOflex CO., LLC. offers Field Welders for installation and replacement of endless polyurethane timing belts in machinery and equipment on location. No costly and time-consuming disassembly is necessary. BRECOflex CO., L.L.C. provides open-ended timing belts with prepared belt ends for field welding. Little or no machine disassembly is required for the installation of replacement polyurethane timing belts. Once the timing belt is in place, the Field Welder will fuse the timing belt ends together in about 30 minutes. Only 120V or 240V 60 Hz is required – no water cooling is necessary. The result is an endless polyurethane timing belt installed in the field on the most complex machines. The tensile strength of field welded timing belts equals the strength of factory supplied timing belts. For a demonstration, please watch the video below. For technical support, please contact Applications Engineering.
BRECOflex CO., LLC. offers Field Welders for installation and replacement of endless polyurethane timing belts in machinery and equipment on location. No costly and time-consuming disassembly is necessary. BRECOflex CO., L.L.C. provides open-ended timing belts with prepared belt ends for field welding. Little or no machine disassembly is required for the installation of replacement polyurethane timing belts. Once the timing belt is in place, the Field Welder will fuse the timing belt ends together in about 30 minutes. Only 120V or 240V 60 Hz is required – no water cooling is necessary. The result is an endless polyurethane timing belt installed in the field on the most complex machines. The tensile strength of field welded timing belts equals the strength of factory supplied timing belts. For a demonstration, please watch the video below. For technical support, please contact Applications Engineering.
The field welder consists of:
Available in all belt pitches, single and double sided, in widths from 25 mm / 1″ to 150 mm/ 6″
Brecoflex CO., L.L.C. does not supply the required chemical NMP.
1-Methyl 2-pyrrolidone (N-Methylpyrrolidone)
NOTE: Dispense NMP from the original bottle to a single use container (or airtight dispensing bottle) before applying to the belt. Chemical is only effective for the first 3-4 hours of exposure to air. Keep chemical bottle cap closed as much as possible. Discard used chemical and container after use and/or after 4 hours of exposure to air. Never contaminate the original chemical bottle with used chemical or a brush.
Please contact one of the following suppliers or your local chemical house.
Suppliers
Sigma-Aldrich Chemicals product # 443778 (WI) – 414-273-3850
www.sigmaaldrich.com
Univar Solutions (Morrisville, PA) – 215 428-4051
www.univarsolutions.com/chemical-types/chemicals-product-finder/
George S. Coyne Chemical (Croydon, PA) – 215 785-3000
www.coynechemical.com
Alphacehem Limited (Mississauga ON, Canada) – 905 821 2660
www.alphachem.ca
To view our Field Welder Instruction Guide please click here.
AT10
AT10-DL
AT10MOV
AT10PRO
AT15
AT15MOV
AT15PRO
AT20
AT20-DL
AT20PRO
AT3
AT5
AT5-DL
AT5PRO
AT8
ATK10-DL
ATK10K13
ATK10K6
ATK12.7K6
ATK20K13
ATK5K6
ATL10
ATL20
ATL5
ATN10
ATN10K6
ATN10K6
ATN12.7
ATN12.7K6
ATN20
ATP10
ATP15
ATS15
BAT10
BAT15
BATK10
BATK15
F1.0
F2.0
F2.2
F3.0
F3.0 PRO
F6.0
H-T1/2
H-T1/2-DL
HK13
HTD14
HTD3
HTD5
HTD8
L-T3/8
MXL-0.80
SFAT10
SFAT15
SFAT20
STD-S5M
STD-S8M
T10
T10-DC
T10-DL
T10PRO
T2
T2.5
T20
T20-DL
T20PRO
T5
T5-DL
TK10-K13
TK10-K6
TK20K13
TK5-K6
XH-T7/8
12mm-150mm
